Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Interlux Trilux Boat Prop & Drive Antifouling Paint YBA068A
This product ad may change over time
ShareInterlux Trilux Boat Prop & Drive Antifouling Paint YBA068A
See more belowColor : White
Sorry, We couldn't find this product
✕Microsoft may receive compensation for clicks on these products, but such compensation has no effect on the ranking or relevance of results
Description
Interlux Trilux Boat Prop & Drive Antifouling Spray PaintProps and engine drives are constantly being submerged in water, which can cause a breakdown of the metals or corrosion. Protecting them is key to long-lasting props and drives. Interlux has a specially formulated antifouling spray just for props and engine drives. Trilux prop paint helps protect the vital parts from the underwater elements and keeps them up and running season after season.Trilux prop paint is a high-quality antifouling spray paint designed just for aluminum outboards and outdrives but is safe for all underwater metals. Made with the Interlux Biolux technology, it prevents slime, algae, and other organisms from attaching to your props and engine parts. The highly effective controlled-release film technology in the Interlux Trilux prop paints helps deter these elements. For optimal results on bare metal, prime with Primocon first to ensure best results. Features: Convenient aerosol can provide effective antifouling; Interlux' exclusive Biolux technology reduces slime and increases antifouling performance; Safe for all out drive and underwater metals; Can be used in fresh, salt, and brackish water; Only available in 12 oz. aerosol can; Specifications: Size: 12 fl. oz.; Finish: Matte; Coverage (approx): 21.2 ft² per spray can; Number of Coats: 1-2 as needed; Colors Available: YBA063A Black, YBA064A Gray, YBA068A White; VOC: 470 g/lt; It is important that you shake can well before use. If can is not shaken properly, clogging of the tip may occur. How To Apply Interlux Trilux 33 Aerosol PaintPrior to application, shake can well. Listen for mixing-ball and continue shaking vigorously for at least two minutes. Shake in an up and down motion. If not shaken properly, tip may clog. Application Method: Aerosol can; Number of Coats: 1-2 as needed. Use an entire can per lower unit.; Dry film thickness: 2 mils; Coverage: 21.2 ft² per spray can; Application Temp: 50F Min. / 95F Max.; Dry Times: Temp To Touch To Recoat To Launch 95F 1/2 HR 4 HR 8 HR 73F 1/2 HR 6 HR 12 HR 50F 1/2 HR 12 HR 16 HRSurface Preparation Bare Aluminum:; Grind or blast the bare aluminum to a bright metal finish.; For best results, pre-prime using an etch primer.; Remove sanding residue or any dust.; Immediately apply at least 3 coats of Interprotect 2000E (first coat thinned 10-15%) or one full can of Primocon Aerosol Primer YPA985; Previously Painted Surfaces; If previously painted with Trilux 33, sand with 80 grit sandpaper.; If factory finish or antifouling paint, sand with 80 grit sandpaper then clean with special thinner 216. Resand any areas where bare aluminum is exposed with medium grit emery cloth and wipe clean. Follow the procedure for bare aluminum above.; Epoxy:; Remove all surface contamination using Fiberglass Surface Prep YMA601.; Flush with fresh water and allow to dry.; Sand with 80 grit paper, then remove sanding residue.; Wipe with Fiberglass Solvent Wash 202.; Apply Interprotect 2000E as primer.; Application At least 2 coats should be applied.; Hold can 12-16" from the unit when applying the paint.; Wait for minimum overcoating time between coats.; Continue until entire can has been used per outdrive.; Allow minimum immersion time.; Click to Download Interlux Trilux 33 Application Instructions
Buying Options
✕Microsoft may receive compensation for clicks on these products, but such compensation has no effect on the ranking or relevance of results
Specifications
| Quantity | 16oz. |
| Opacity | 21.2sq.ft./gal. |
| Application | Spray |
| Item Weight | 1 Pounds |
| Size | 16 Fl Oz (Pack Of 1) |
| Package Dimensions | 7.2 X 3 X 2.9 Inches |
| Age Range (Description) | Adult |
| Item Form | Aerosol |
| Exterior | Aluminum |
| Type of Paint | Antifouling |
| Date First Available | February 16, 2011 |
| Brand | Interlux |
| Package Contents | Interlux Yba064a/16 Trilux 33 Aerosol Antifouling Paint - Gray, 16 Oz. |
| Manufacturer Part Number | Yba064a/16 |
| Oem Part Number | Yba064a16 |
Feedback